Jobs2Careers logoHome

Assemblers Machine Operators In

Alabama

1706 Assemblers Machine Operators In jobs in Alabama

Apply Directly
Machine Operator

SNAP-ON

Elkmont, AL 35620

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

All of our associates are paid WEEKLY.
Three health insurance plans to choose from, one includes an employer contribution Health Savings Account (HSA) with an employer contribution.
Vision and Dental Insurance plans
An option for a Flexible Spending Account and Dependent Spending Account (FSA)
Company paid life insurance, as well as short and long term disability coverage.
Employee assistance program (EAP)
Supplemental Life and Accidental Death and Dismemberment Insurance can be purchased at nominal rates
Discounts on travel and company products including tools
A tuition reimbursement program
A 401K with an employer match/contribution at 3%
Paid vacation, plus three days of paid time off for personal days
11 paid holidays
A climate-controlled work environment with heating and air conditioning.
Full-time position
Sunday through Thursday from 10:00 p.m. until 6:00 a.m. central time the following morning
Overtime including weekends as maybe deemed necessary.
This position may require overtime to include weekends.
High School diploma, G.E.D. and one to three years manufacturing experience.
Working knowledge of diverse high-speed machinery and measurement tools (i.e. calipers, micrometers, etc.)
Understanding of production procedures.
Ability to read blueprints, schematics and manuals.
Ability to apply basic mathematical skills: add, subtract, multiply, divide.
Perform work from drawings, specifications and formulas involving limited detail.
Must be aware and adhere to all company and departmental safety procedures and policies.
Ability to work on 1st, 2nd, or 3rd shifts.
All candidates must be at least 18 years of age or older
Possess excellent knowledge of the English language including reading, writing, and speaking.
Bending, standing and/or walking for an extended length of time (typically 8 hours)
Light lifting on a repetitive basis or lifting on an occasional basis of approximately 30 pounds
Repetitive motions required in some jobs
Visual acuity required in most jobs
Eye-hand coordination
Finger dexterity
The ability to concentrate for extended periods of time.
Apply Directly
Assembler - Manufacturing

Federal Signal

Leeds, AL 35094

$23/hr
Onsite

Starting rate of $23 per hour, plus quarterly bonus eligibility
High School Diploma or equivalent with basic mechanical education
6 Months related job experience
Ability to read drawings, blue prints and work instructions
Ability to obtain a Fork Lift Certification
Ability to appropriately use measuring devices (dial indicator, volt meter, pressure gauge)
Ability to lift 50 lbs. and stand for at least 6 hours per day.
Possesses advanced mechanical knowledge of hydraulic sytems,12-volt electrical systems, drive systems (including drive shafts, cogged belts or roller chains) or external engine assembly/repairs commonly found on mobile equipment.
Knowledge of Programmable Logic Controller (PLC) controls and Can-Bus networks, a plus.
Certification in Diesel Mechanic a plus
Apply Directly
Machine Operator

Kenco

Tanner, AL 35671

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Medical insurance including HSA, HRA and FSA accounts
Supplemental insurance including critical illness, hospital indemnity, accidental injury
Dental Insurance
Vision Insurance
Basic Life and Supplemental Life
Short Term and Long Term Disability
Paid Parental Leave
401(k)
Paid Time Off approximately 2 weeks (accrual begins on Day 1 of employment)
Employer Paid Holidays- 10 days
High School Diploma or GED required
1+ years of production experience in a manufacturing environment required
Knowledge of various tools and equipment including but not limited to: manufacturing process equipment, personal protective equipment (e.g. safety shoes, eye protection, protective aprons, respirators, gloves, etc.), measurement tools (e.g. micrometers, weigh scales, etc.), hand tools (e.g. wrenches, screwdrivers, hammers, etc.) and test equipment (e.g. eddy current, volt meters, etc.).
Knowledge of various materials used to include but not limited to: various grades of titanium and other specialty alloys, drawing compounds and lubricants, solvents and process chemicals.
Ability to set-up and operate applicable machines, tools and equipment.
Intermediate understanding of computers and/or the willingness to learn is required.
Ability to read procedures and work instructions with understanding.
Powered Industrial Truck (PIT) Certification preferred.
Side-loader experience preferred
Apply Directly
Machine Operator

Parker Hannifin

Jacksonville, AL 36265

Onsite

High School Diploma or equivalent
Minimum of six months of on-site training as a machine operator or 3 years of related work experience as a machinist
Apply Directly
Machine Operator II (Madison, Alabama (AL), US, 35756)

SPX

Madison, AL 35756

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Competitive and performance-based compensation packages and bonus plans
Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave
Competitive health insurance plans and 401(k) match, with benefits starting day one
Educational assistance, leadership development programs, and recognition programs
3-5 years experience in a manufacturing environment
3-5 years experience operating fabricating machinery
Read a tape measure and ruler and convert fractions to decimals and decimals to fractions
Lifting up to 100 pounds; 100+ pounds with assistance
Sitting, standing, walking, bending, grasping, pushing, pulling, crawling, climbing, twisting, reaching, working at heights, and using a ladder as required
Ability of use both hands overhead
Perform repetitive motions
High school diploma or GED required
The employee will be required to stand and walk for at least 8 hours.
Regularly be required to push/pull material up to 3000lbs, with assistance of overhead crane.
Climb stairs, reach and bend regularly
Occasionally sit, grasp, climb, crawl, twist, and work at heights.
Occasionally lift, hold and/or move up to 50 pounds
Manufacturing environment requires use of required Personal Protective Equipment, such as foot, eye and ear protection when in production locations
3-5 years' experience programming equipment (Laser or brake)
Ability to use precision hand tools
Spot welding
Apply Directly
Machine Operator I

Curbell

Birmingham, AL 35209

Onsite
Apply Directly
Night Shift Extrusion Machine Operator

apsTemps

Cullman, AL 35055

$17.80-$19.40/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit

$17.80 - $19.40 per hour
Weekly Pay
40 Hours Service Bonus after 1 year of continuous service and 1500 hours
$50.00 referral bonus
Will train on day shift 6am-6pm for 30-100 days
Medical, dental, vision, short-term disability, and life insurance
6 paid Holidays after 1 year of continuous service and 1500 hours
401(k) matching
Night shift 6pm – 6am
Will train on day shift 6am-6pm for 30-100 days
2 days on – 2 days off – 3 days on, rotation
Have to be able to work every other weekend
Full-time, temporary
2 years previous operator
Math test required
New, Posted 1 day ago
Easy Apply
Bag Machine - Operator in training

ProAmpac

Mobile, AL 36615

Onsite

HS/GED required
2-4 years' experience in a related field experience in a related field required.
The employee is regularly required to stand; walk; use hands/fingers to type, hold, handle, or feel; and reach with hands and arms.
The employee must occasionally lift and/or move up to 50 pounds.
HS/GED preferred
Apply Directly
Production Manager

Raptor Scientific

Huntsville, AL 35824

Apply Directly
PRODUCTION TECHNICIAN

Kappler

Guntersville, AL 35976

Onsite

Hand/eye coordination.
Must be able to read and follow directions.
Intermediate computer skills to include ERP software.
Basic math skills including an advanced understanding of units of measure, fractions, and decimals.
Proficient with Microsoft Office Suite or related software.
High School diploma or GED.
Must be able to stand, sit, and walk for prolonged periods of time; talk, hear, and use hands and fingers to operate computer and telephone keyboards.
Ability to see and adjust; close vision and distance vision.
Must be able to lift up to 25 pounds at a time.
Profile builder
Answer questions related to your search and surface your matches.
Browse Jobs
  • Jobs in Top Cities
  • Jobs by State
  • Jobs by Title
  • Jobs by Category
Tools
  • Free Resume Builder
  • Jobs2Careers+ Extension
Company
  • Post a Job
  • About
  • Advice
  • Contact
Jobs2Careers Powered by Talroo© 2026 Jobs2Careers
Logos provided by Logo.dev
© 2026 Jobs2Careers
Privacy PolicyTerms of UseYour Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon
Jobs2Careers Powered by Talroo